Safety, functionality, signage, convenience or lengthy evenings on the patio - there are so many good reasons for installing outside lighting. But the installation will be exposed to damp, changes in temperature and even shocks. So several precautions must be taken.
In all cases, only buy watertight equipment compliant with standard IP23 at least (it is indicated on the box).
Caution, if there is a problem, your insurance company will refuse to cover you if your equipment is not compliant. |
Think about movement detectors to switch on your system. The lights are fitted with a twilight sensor. This means that they will no longer work at sunrise and thus will not switch on unnecessarily. More sophisticated models can be adjusted for time, range and sensitivity, which prevents the lights from switching on every time your cat is on the prowl.
If you opt for manual operation with a switch, choose a bipolar model. This is safer as it cuts the current on both wires.
In 230 V, you must without fail connect the outside line to a 30 mA differential circuit breaker (like for the kitchen and bathroom). This circuit breaker must only be used for the outside line.
If you decide on 12 V, check that the transformer is designed for outside use. Otherwise, connect it to a socket inside a room and start the wiring to the outside from there.
Attention! Only use cable that can be buried (VVB) and thread it through a second grooved insulating sheath. |
Always bring the cables in via the bottom of lights, boxes or switches, never on the side.
Replace any defective or damaged equipment without hesitation.
Subscribe to our newsletter and stay informed about energyfacts.